Change Currency: GBP

Change Language: DeutschDanskEnglish (UK)English (US)EspañolFrançaiseעברית (ישראל)DutchTürkçe

Self Adhesive & Ultra Thin Decal Application

DOC ID8

Please note to what decal you have (self adhesive or ultra thin NOT water slide)

SELF ADHESIVE DECAL APPLICATION INSTRUCTIONS

Prepare your wood surface by applying at least one coat of
hard finish, such as varnish or lacquer, and sanding it smooth
(600 grit) after it dries.
You may also apply the decals to a fully finished instrument
(no need for sanding if the surface is clean and smooth)

1. Carefully peel off backing paper from decal

2. Position decal on headstock or surface to be fixed to

3. Rub down the decal from the centre outwards to remove any bubbles

4. Carefully peel back the application tape

5. Rub over decal with finger to ensure good adhesion

These self adhesive decals do not need lacquering over, but can be lacquered with acrylic lacquer is required

 

You must apply several "dust coats" of lacquer first and let them dry otherwise you are at risk of the decal melting

 

.........................................................................................................................................................................

 

%1$s uses cookies. For more detailed information about these cookies please see our privacy policy. Please accept to continue or block all non-essential cookies.

I accept cookies from this site.

eCommerce by CubeCart